News

Pad Print

Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.

Advantages

Ideal for printing on curved or uneven products.
Close PMS matches are possible on white or light coloured products.
Metallic gold and silver is available.

Limitations

Halftones cannot be consistently reproduced.
The size of branding areas is limited on curved surfaces.
Unable to print variable data.
Close PMS matches are more difficult on darker products and will only be approximate.
Minor print distortion may occur on uneven or curved surfaces.
Pad print inks require a curing period before the product can be shipped.
A set up charge is required for each colour to be printed.

Artwork Requirements

Artwork should be supplied in vector format.

Rotary Digital Print

Direct to product rotary digital printing involves the transfer of UV ink directly from inkjet print heads and can be used to produce detailed artwork using both closely matched spot colours and full colour branding.

Advantages

Ideal for large or complex full colour prints.
The print is dry and ready to ship as soon as the product is printed.
Only one setup charge is required regardless of the number of print colours.
No loss of print vibrancy, even on darker products.

Limitations

Production speed is limited so lead times can be longer in some cases.
Some colours cannot be reproduced including metallic and neon/fluorescent colours.
As the print does not wrap completely around the product, there is a small gap between the start and end of the print.
More expensive than other branding options.

Artwork Requirements

Artwork can be supplied in either vector or bitmap format.
Supplied bitmaps must be higher than 300DPI resolution at the actual print size.
Fonts are advised to be converted to outlines/objects to avoid font conflicts.

Rotary Screen Print

Rotary Screen Printing is achieved by forcing ink through a fine mesh screen with a squeegee onto the product and is ideal for cylindrical objects.

Advantages

Large print areas are possible on cylindrical products.
Close PMS matches are possible on white or light-coloured products.
Most screen print inks are quick drying and can be shipped immediately after printing.
Metallic gold and silver colours are available.
Many products can print five colours (including white) with tight multi-colour registration.
Halftones can be achieved on certain products.

Limitations

Close PMS matches are more difficult on darker products and will only be approximate. In some instances, a white base will create a better print.
Unable to print variable data.
Each colour requires its own setup charge.

Artwork Requirements

Artwork must be supplied in editable vector format.
Fonts are advised to be converted to outlines/objects to avoid font conflicts.

Flatbed Screen Print

Flatbed Screen Printing is achieved by forcing ink through a fine mesh screen with a squeegee onto the product and is ideal for branding flat objects.

Advantages

Large print areas are possible on flat products.
Close PMS matches are possible on white or light-coloured products.
Most screen print inks dry quickly and can be shipped immediately after printing.
Fluorescent, metallic gold and silver inks are available.
Many products can print with tight multi-colour registration, with some products able to be printed using up to six colours.
Halftones are achievable on some products.

Limitations

Close PMS matches are more difficult on darker products and will only be approximate. In some instances, a white base will create a better print.
Unable to print variable data.
Each colour requires its own setup charge.

Artwork Requirements

Artwork must be supplied in editable vector format.
Fonts are advised to be converted to outlines/objects to avoid font conflicts.

Imitation Etch

Imitation etch is a special pad printing ink used for producing an etch-like effect on glass products.

Advantages

Much more affordable than real etching.
Can brand curved or uneven products.
Produces a subtle finish with a higher perceived value that looks like etching.

Limitations

Halftones cannot be consistently reproduced.
The size of branding areas is limited on curved surfaces.
Requires a curing period before the product can be shipped.
Unable to print variable data.

Artwork Requirements

Artwork must be supplied in a vector editable format.
Fonts are advised to be converted to outlines/objects to avoid font conflicts.

Laser Engraving

Laser engraving is a permanent branding process that engraves artwork into the surface of the product using a laser. Different materials produce different engraving finishes, to avoid uncertainty pre-production samples are recommended.

Advantages

Higher perceived value than other forms of branding.
The branding becomes part of the surface and is permanent.
Large branding areas available on curved products.
Can produce variable data such as individual names.
The product can be shipped straight away after being engraved.

Limitations

Fine detail can be lost on smaller products like pens.

Artwork Requirements

Artwork must be supplied in editable vector format.
Fonts are advised to be converted to outlines/objects to avoid font conflicts.

Resin Coated Finish

This CMYK branding process is produced by printing artwork onto a vinyl material with strong adhesive on the reverse. The branded area is then coated with a crystal-clear resin. Once dry, the finished decal is applied to the product and the adhesive forms a permanent bond.

Advantages

Ideal for producing vivid full colour images as well as closely matched spot colour branding.
Produces a stunning 3D effect that elevates the perceived value of a product.
Can print variable data including individual names.
Edge-to-edge branding can be achieved on the resin coated area.
Only one set up charge is required regardless of the number of print colours.

Limitations

Larger print areas can be more expensive.
White, metallic gold, silver and neon colours cannot be printed.
The resin needs to be cured for one day before shipping the product.

Artwork Requirements

Artwork can be supplied in either vector or bitmap format.
Supplied bitmaps must be higher than 300DPI resolution at the actual print size.
A 3mm bleed must be added to the artwork if it bleeds off the product.

Digital Transfer

A digital transfer is a CMYK+W printing method used for branding fabrics. The artwork is printed on transfer paper using a digital printing machine, then heat pressed onto the product.

Advantages

Cost effective method for producing full colour and closely matched spot colour transfers.
High definition, complex, vibrant artwork suitable for a range of garment fabrics.
Produces a matt finish that will not crack or fade under normal circumstances.
Efficient self-weeding technology.
Only one set up charge is required regardless of the number of print colours.
Can be shipped straight after being printed.
Uses eco-friendly water-based inks.

Limitations

Some colours cannot be reproduced such as metallic and neon/fluorescent colours.
A thin keyline of glue can sometimes be seen around the edges of the image.
Unable to print variable data.

Artwork Requirements

Artwork can be supplied in either vector or bitmap format.
Supplied bitmaps must be higher than 300DPI resolution at the actual print size.

Sublimation Print

Dye sublimation print is used for branding products that have a special coating on them, or fabrics suitable for the sublimation process. A transfer is produced by printing sublimation ink onto transfer paper and then heat pressing it onto the product.

Advantages

Sublimation ink is a dye so there is no ink build-up. The finished print is embedded in the product.
Ideal for producing vivid full colour images as well as closely matched spot colour branding.
Can print variable data including individual names.
Edge-to-edge branding can be achieved on some products.
Only one set up charge is required regardless of the number of print colours.

Limitations

Can only be used on suitable products with white surfaces.
Some colours cannot be reproduced including white, metallic, and neon/fluorescent colours.
Fine detail/text may experience minor colour bleed across adjacent design elements.

Artwork Requirements

Artwork can be supplied in either vector or bitmap format.
Supplied bitmaps must be higher than 300DPI resolution at the actual print size.
A 3mm bleed must be added to the artwork if it bleeds off the product.

Digital Print

This production method is used for printing media such as paper, vinyl and magnetic material used in the manufacture of labels, badges, and fridge magnets etc. This printing process uses CMYK values.

Advantages

Ideal for producing vivid full colour images as well as closely matched spot colour branding.
Can print variable data including individual names.
Only one set up charge is required regardless of the number of print colours.
Can be cut to custom shapes.
Edge-to-edge branding can be achieved.

Limitations

Metallic and neon/fluorescent colours are not available.
White print cannot be produced on clear, silver or gold stock.

Artwork Requirements

Artwork can be supplied in either vector or bitmap format.
Supplied bitmaps must be higher than 300DPI resolution at the actual print size.
A 3mm bleed should be added to the artwork if it bleeds off the product.

Digital Label

Digital adhesive labels are used to brand products that cannot be branded with any other method. They are printed with a digital printing press and applied to the product.

Advantages

Ideal for producing vivid full colour images as well as closely matched spot colour branding.
Can print variable data including individual names.
Only one set up charge is required regardless of the number of print colours.
Edge-to-edge branding can be achieved.
Can be cut to custom shapes.

Limitations

Metallic and neon/fluorescent colours are not available.
White print cannot be produced on clear, silver or gold stock.

Artwork Requirements

Artwork can be supplied in either vector or bitmap format.
Supplied bitmaps must be higher than 300DPI resolution at the actual print size.
A 3mm bleed should be added to the artwork if it bleeds off the product.

Direct Digital

Direct digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both full colour and closely matched spot colour branding on flat or slightly curved surfaces.

Advantages

Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
Can print variable data including individual names.
Dried instantly so products can be shipped immediately.
Offers larger print areas on many products and can print very close to the edge of flat products.
Only one set up charge is required regardless of the number of print colours.

Limitations

Some colours cannot be reproduced including metallic and neon/fluorescent colours.
The size of branding areas is limited on curved surfaces.
Larger print areas can be more expensive.

Artwork Requirements

Artwork can be supplied in either vector or bitmap format.
Supplied bitmaps must be higher than 300DPI resolution at the actual print size.
A 3mm bleed must be added to the artwork if it bleeds off the product.

Debossing

Commonly referred to as ‘Blind’ debossing, a heated custom metal plate is pressed firmly onto the product leaving an impression of the artwork. Thermo debossing is also available on certain products, using additional heat to create a unique and eye-catching two-tone finish.

Advantages

Higher perceived value than other forms of branding.
The branding becomes part of the product and is permanent.
The product can be shipped as soon as heat pressing is finished.
Certain products can produce a two-tone finish.

Limitations

Unable to print variable data such as individual naming.

Artwork Requirements

The artwork must be supplied in vector format.
Fonts are advised to be converted to outlines/objects to avoid font conflicts.

Embroidery

Embroidery is an excellent way of branding bags, apparel, and other textile products. It offers higher perceived value and a depth of branding quality which other processes cannot match. Embroidery uses rayon thread which is stitched into the product and has a slightly raised effect.

Advantages

Only one setup charge applies per position for up to 12 thread colours.

Limitations

Only approximate PMS colour matches are possible - the threads to be used are chosen from those available to give the closest possible match. See our thread colour chart for the colours available.
We recommend avoiding fine detail and font sizes which are less than 4mm high.
Unable to print variable data such as individual naming.
Metallic embroidery colours have special pricing.

Artwork Requirements

Vector artwork is preferred.
Fonts are advised to be converted to outlines/objects to avoid font conflicts.

Silicone Digital Print

This production method is a CMYK+W digital branding process designed specifically for silicone surfaces.

Advantages

Provides crisp, clear, high-definition artwork.
Durable, flexible branding that can be hand washed.
Perfect for printing dark coloured products as a layer of white ink can be printed under the artwork.
Ideal for producing full colour images as well as approximate spot colour branding.
Has a matt finish and does not crack or fade with typical use of product.
Only one set up charge is required regardless of the number of print colours.

Limitations

Some colours cannot be reproduced including metallic and neon/fluorescent colours.
Unable to print variable data.
Minimum detail is advised to be no finer than 0.7mm.

Artwork Requirements

Artwork can be supplied in either vector or bitmap format.
Supplied bitmaps must be higher than 300DPI resolution at the actual print size.
Fonts are advised to be converted to outlines/objects to avoid font conflicts.

Colourflex Transfer

Colourflex transfers are a CMYK+W digital print process, used for branding apparel and fabrics.

Advantages

Ideal for producing full colour images (including gradients) as well as approximate spot colour branding.
High definition, vibrant matt finish artwork that is suitable on a range of garment fabrics.
Eco-friendly water-based inks.
Durable, flexible, and machine washable with a soft-touch matt finish.
Efficient self-weeding technology.
Only one set up charge is required regardless of the number of print colours.
Can be shipped straight after being printed.

Limitations

Some colours cannot be reproduced including metallic and neon/fluorescent colours.
A thin, clear line of glue can sometimes be seen around the edges of the image.
Unable to print variable data.
Minimum detail advised at 1mm.

Artwork Requirements

Artwork can be supplied in either vector or bitmap format.
Supplied bitmaps must be higher than 300DPI resolution at the actual print size.
Fonts are advised to be converted to outlines/objects to avoid font conflicts.

Contact

Age verification

Search

Main menu

Shopping Cart

Your cart is currently empty.

Pad Print

Pad Print

Rotary Digital Print

Rotary Digital Print

Rotary Screen Print

Rotary Screen Print

Flatbed Screen Print

Flatbed Screen Print

Imitation Etch

Imitation Etch

Laser Engraving

Laser Engraving

Resin Coated Finish

Resin Coated Finish

Digital Transfer

Digital Transfer

Sublimation Print

Sublimation Print

Digital Print

Digital Print

Digital Label

Digital Label

Direct Digital

Direct Digital

Debossing

Debossing

Embroidery

Embroidery

Silicone Digital Print

Silicone Digital Print

Colourflex Transfer

Colourflex Transfer

Contact

News

Subscribe for weekly specials

Popup

Age verification

Search

Main menu

Shopping Cart

Your cart is currently empty.

Pad Print

Pad Print

Rotary Digital Print

Rotary Digital Print

Rotary Screen Print

Rotary Screen Print

Flatbed Screen Print

Flatbed Screen Print

Imitation Etch

Imitation Etch

Laser Engraving

Laser Engraving

Resin Coated Finish

Resin Coated Finish

Digital Transfer

Digital Transfer

Sublimation Print

Sublimation Print

Digital Print

Digital Print

Digital Label

Digital Label

Direct Digital

Direct Digital

Debossing

Debossing

Embroidery

Embroidery

Silicone Digital Print

Silicone Digital Print

Colourflex Transfer

Colourflex Transfer